Yingjie Sanitary Hardware / White Glass Programme / Concealed Cistern Line
This is the real catalogue image for the plate - a soft white face standing beside a frame diagram, with the fit promise printed directly on the artwork.
Soft white glass face · Light-wall scheme · Geberit-matched
Soft white glass that settles into a light wall, fitted only after the frame behind that wall is confirmed.
A white glass control face for concealed-cistern bathrooms finished in pale stone, light tile or white sanitaryware. Two round buttons on one clean glass programme - and the working rule behind every order: the cistern frame is identified and verified before any price, sample date or delivery promise leaves the office.
Wall palette
The white face is chosen against the wall, not in a catalogue. Compared beside light tile, white sanitaryware or pale stone, the glass keeps a clean edge instead of becoming the darkest object in the room. Finish is agreed on the supplied artwork, then locked by the pre-production sample.
Why white glass
Tempered white glass reads bright, wipes down like a wall tile and hides water spots far better than dark finishes - which is why light-wall hotels and family bathrooms keep choosing it. The two buttons stay clearly readable while the face itself stays quiet.
Handover proof
Approval happens against reality: the white sample that goes to the installer is accompanied by its own fit-verification note, and every production batch is held to that exact approved part - never to a screen render.
01 / Light-wall evidence
One artwork, two claims: a soft pale finish and a Geberit-family fit
The catalogue shot does double duty for this plate. It shows the white glass face next to a line drawing of the concealed frame family, and it states the fit direction in plain words: built for the popular Geberit concealed models. That is how a control plate should be presented - the visible button face is only half of the product story, with the frame inside the wall writing the other half.
Look closer and the image carries two separate promises. The finish promise: a pale glass face composed for light tiles, white porcelain and bright rooms. The engineering promise: a plate that points at the Geberit concealed-frame family. What the photo cannot promise is the precise wall - frame model, opening measurement and actuation type still have to be cross-checked before production starts. Treat the artwork as the invitation and the frame data as the contract.
The catalogue artwork itself carries the light-wall message - the pale face presented together with the concealed frame it is designed for.
What actually fixes the fit
Fit comes down to three facts: the exact model of the cistern frame, the finished opening measurement, and whether actuation is mechanical or pneumatic. Share those three facts and the quotation returns together with a written compatibility note - the pale finish is chosen by eye, the numbers are settled by measurement.
02 / Project handover
Approving the finish first, then locking the fit before the batch runs
Light-wall schemes usually decide the look early - from this artwork and from reference bathrooms - while the frame is still sitting behind an open cavity. So the handover happens in two clean stages: the visible finish is approved on a physical sample, and the technical record is fixed against the actual frame before a single batch plate is made.
- Share the cistern frame model, or simply a photo of the wall before it is closed, together with the finish reference.
- We verify the push or pneumatic actuation and the finished opening dimension against that model as the very first step.
- Sampling: the white plate is dispatched with a typed fit verification so the installer signs off on the real part, not on a rendering.
- Every production batch is re-checked against the signed-off sample before loading, and packing photos accompany the shipment documents.
- Branding, button symbols and custom packaging only enter the order once the technical match is signed off.
If the project later shifts to a darker palette, the black twin of this plate is available as its own listing - the same Geberit-line programme, without starting a new supplier relationship.
03 / Specification card
The spec card for site: finish, actuation and fit in one table
| Product type | White glass dual-button flush plate for concealed frames in the Geberit range |
| Face & finish | Tempered glass face in a soft white tone, smooth and wipe-clean; a black twin is available from the same programme |
| Actuation | Two round buttons giving full and half flush; mechanical or pneumatic operation confirmed against the frame during the enquiry |
| Frame compatibility | Aimed at the Geberit concealed-frame family; sign-off always uses your frame model, opening size and actuation type |
| Surface behaviour | Picked for pale tile, white sanitaryware and light stone; the white face keeps a fresh look longer between cleans |
| Customisation | Customer logo, legend prints and retail packaging can be added to the order once the fit has been approved |
| Sample route | White sample delivered with a written fit note, typically dispatched within about a week of the technical confirmation |
| Quantity & timing | MOQ and lead time are confirmed in the quotation that follows the frame check; each batch ships with its own inspection photos |
04 / Buyer questions & FAQ
Questions that usually surface before the tiles close in
Will a white plate simply vanish against a pale wall?
Not in practice - the circular buttons keep their own geometry and shadow line, so the control remains readable while the face stops being the loudest element in the room. For very pale schemes the button-ring contrast can be tuned on the sample; mention it in the brief and we will demonstrate it before production.
Is a white face harder to maintain than a dark one?
It is actually the easier direction. Tempered glass wipes clean like a tile, and the light surface makes water marks and fingerprints far less noticeable than they are on dark glass - the main reason hospitality and family bathrooms in light schemes prefer the white twin.
Which details unlock a quick first reply?
A clear starting kit has three parts: the frame or cistern model, one photo of the opening (or of the open wall), and the finish direction you want to see sampled. From that kit we can normally return the fit verdict, the sample proposal and the quotation inside the same week.
Can light and dark plates travel in one order?
Certainly - the dark twin is a separate listing in this same catalogue and goes through the identical fit-verification routine. Bathrooms of different moods can therefore share a single purchase file without mixing suppliers.
Next step
Let the frame decision come first - the white glass will follow the wall.
Start with the frame or cistern model plus a photo of the opening - that is all we need to prepare the matching record, the white sample and the quotation in a single pass. And if the scheme turns darker before the order, the black twin is one message away.
White glass face · Light-wall scheme · Geberit fit confirmed
Hot Tags: white glass circular-button flush plate for geberit systems | bathroom project oem, China white glass circular-button flush plate for geberit systems | bathroom project oem manufacturers, suppliers, factory, Bathroom Durable Tank Pp Concealed Cistern, Bathroom Toilet Wc Wall Hang Toilet Fitting Tank, CE Watermark Europe Bathroom Water Tank, Hdpe Concealed Cistern with Tank, High Quality Modern Design Double Water Tank, Manufacturer Sanitary Ware Concealed Water Tank
