Bathtub

A freestanding bathtub stands on the floor on its own base rather than being built into a surround or recess. It is finished on all sides, so no tiling, panel or deck is required around it, and it can be positioned away from the wall. That freedom is exactly why it has to be planned more carefully than a built-in tub: with no surround to absorb variation, every dimension — bowl length, rim height, base footprint, waste outlet position — has to be right on the first pass.

Three consequences drive the specification. Weight and support: a filled ceramic tub concentrates a large load on a small base area, so the floor and the level build-up have to be confirmed before installation. Pipe routing: a freestanding tub has no wall cavity to hide behind, so the waste and supply route — and whether the floor needs a trap recess — is decided at the design stage. Access: it is the bulkiest item in the room, so the route from the loading bay to the bathroom must be measured, not assumed.

Freestanding tubs are normally specified together with the room's other sanitary ware — the toilet, the basin and the shower — because the tub is what sets the rest of the layout.

• Slim-rim art freestanding bathtub — a thin rim line and a clean outer profile, specified where the tub is meant to read as a design object in the room rather than as sanitary ware.
• Compact low-profile freestanding bathtub — reduced height and footprint for smaller bathrooms and en-suite layouts where a full-height tub would dominate the space.
• Sharp-edge rectangular freestanding bathtub — architectural straight lines for contemporary interiors, with the outer face finished on all sides.
• Rectangular vitreous china freestanding bathtub — the standard rectangular format in glazed vitreous china, for projects that want a straightforward, hard-wearing specification.
• Space-saving corner freestanding soaking bathtub — shaped to sit into a corner and recover the circulation space a rectangular tub would take.
• Deep soaking freestanding bathtub — increased depth for guest bathrooms and residential projects where soaking performance is the specification driver.

1. Measure the room, not the tub first. Record the clear length and width available after tiling, and check the door swing and circulation path before considering any model.
2. Fix the waste and supply position. A freestanding tub has no wall cavity to conceal the pipe route, so the outlet position, trap type and whether the floor needs a recess are decided here.
3. Confirm the floor and the level build-up. A filled ceramic tub concentrates load on its base area; the slab or the build-up has to be checked against that load before installation, not after.
4. Measure the access route. Doorway width, corridor turns, lift dimensions and stair corners decide which tub can physically reach the room. This is checked at specification stage, because it cannot be fixed on site.
5. Choose the format against the layout. Corner and low-profile models exist for tight plans; slim-rim and sharp-edge formats are for rooms where the tub is a visible design element.
6. Confirm the destination market and its certification requirement. Market access decides which certification the order carries, and it is cheapest to settle it before production.

• Surface that survives turnover — glazed vitreous china resists scratching, staining and cleaning chemicals far better than acrylic shells, which is what keeps a hotel bathroom presentable after years of guests.
• Colour that does not fade — firing at 1280℃ fuses the glaze into the body, so the finish does not chalk or yellow the way applied coatings can.
• Weight that stays put — a ceramic tub does not flex or creak under load, so it feels solid the way an expensive bathroom is expected to feel.
• Formats for difficult plans — compact, corner and low-profile models recover circulation space in bathrooms where a full rectangular tub will not work.
• One sanitary ware supplier — the tub is quoted, produced and shipped with the project's basins, toilets and mirrors, under one lead time and one documentation set.
• OEM and ODM accepted — custom dimensions, colours, finishes and branding for projects that need a specific specification.

• Hotel guest bathrooms — where the tub is a visible part of the room's finish and the surface has to survive continuous turnover.
• Apartment and residential developments — repetitive bathrooms specified in matched dimensions, colours and finishes across units.
• Serviced apartments and long-stay residences — deeper soaking formats for guests who stay longer and use the tub daily.
• Compact urban bathrooms and en-suites — corner, low-profile and compact formats for plans where a standard tub would block circulation.
• Bathroom projects procured as a package — tubs consolidated with the project's other sanitary ware in one order and one container.

Our bathtubs are produced in vitreous china and fired at 1280℃. At that temperature the glaze fuses into the ceramic body instead of sitting on top of it, which produces the hard, non-porous surface that resists staining, abrasion and repeated cleaning — the property that decides how a bathtub still looks after years of hotel turnover.

Vitreous china also gives the tub its rigidity. Unlike a moulded shell, a fired ceramic body does not flex under a full load, so the base stays flat on the floor and the rim line stays true. That is what allows a freestanding tub to be finished on all sides with no surround to hide variation.

Every order is inspected before loading against the same factory acceptance criteria — appearance, glaze integrity and dimensional accuracy — with the inspection record issued alongside the shipping documents.

Because a freestanding bathtub occupies more container volume per unit than any other bathroom fixture, confirming the loading plan early usually saves more freight cost than negotiating the unit price.

• Custom dimensions — bowl length, width and depth matched to a fixed room, including compact and corner geometries.
• OEM branding — your logo on the product, the carton and the instruction sheet.
• Custom colour and finish — matched against our own colour card; please confirm feasibility with our sales team before specifying.
• Waste and overflow matching — fittings selected to suit the tub's outlet position and the project's plumbing standard.
• Finish matching across categories — the same colour and finish carried onto the project's basins, toilets and mirrors.
• Customized packaging — export carton or project-specific packing and carton marks, with base support sized to the model.

Customization minimum order quantities vary by model and by the type of adaptation requested. The standard MOQ is 50 pieces per model; confirm the applicable minimum with our sales team when you specify the order.

Bathtubs are shipped in standard export 5-ply cartons with packing that supports the unit across its full base and protects the rim line, because a freestanding tub has no surround to hide a chipped edge at the point of installation.

Because a tub occupies more container volume per unit than any other bathroom fixture, the loading plan is prepared as part of the order rather than after production. Where tubs ship together with basins, toilets, mirrors and other categories, we plan the mixed layout to maximize fill while keeping each product family's packing intact.

Send the room's clear dimensions, the waste position and the access route. Our export team replies with the formats that fit the building, the unit pricing, the MOQ and the certifications your order will carry.

Send Your Room Dimensions > Get a Bathtub Quotation