Charcoal Stainless Flush Plate With Outline Round Buttons For Modern Washrooms

Charcoal Stainless Flush Plate With Outline Round Buttons For Modern Washrooms

1105-20 / CHARCOAL OUTLINE Charcoal Stainless Flush Plate with Outline Round Buttons for Modern Washrooms Two slim outline rings are engraved into a charcoal stainless face, so the dual-flush controls read clearly without turning the wall plate into a decorative object.
Send Inquiry
Add To Inquiry
Description

1105-20 / CHARCOAL OUTLINE

Charcoal Stainless Flush Plate with Outline Round Buttons for Modern Washrooms

Two slim outline rings are engraved into a charcoal stainless face, so the dual-flush controls read clearly without turning the wall plate into a decorative object.

Charcoal Stainless Flush Plate with Outline Round Buttons for Modern Washrooms

FINISH

Charcoal PVD stainless

CONTROL

Engraved outline rings

ACTION

Dual flush 3 / 6 L

FIT

Confirm frame opening

WHY THE OUTLINE DIRECTION

The rings are cut, not painted, so the tone never drifts.

An outline ring is recessed about half a millimetre into the plate and left unfilled. Because the material itself forms the line, the panel holds one continuous charcoal tone from across the room and only reveals the two control positions when a guest steps closer.

That behaviour suits washrooms where the architecture is already quiet: pale stone, dark joinery and a wall-hung pan with very little hardware on show. The plate adds a controlled detail instead of a second focal point.

Engraved line / single charcoal tone / nothing extra on the wall

Charcoal Stainless Flush Plate with Outline Round Buttons for Modern Washrooms installation reference

INSTALLATION AND APPROVAL

Read the frame and the opening before the finish is locked.

Outline plates are frame-specific. The actuator spacing, the plate footprint and the wall cut-out all come from the concealed cistern drawing, so we ask for those three numbers together so the sample and the production run match the wall you already built.

  1. Frame brand and model number
  2. Wall cut-out and plate footprint in millimetres
  3. Flush volume requirement for the project
  4. Signed surface sample kept as the reference
Charcoal Stainless Flush Plate with Outline Round Buttons for Modern Washrooms project reference

SPECIFICATION CARD

What the quotation will name.

Plate face Charcoal PVD stainless, brushed grain
Control Two engraved outline rings, unfilled
Flush action Dual, configurable to project volume
Mounting Matches the supplied concealed cistern frame
Customisation Laser mark, carton print and packing on request

BUYER QUESTIONS

Answers before the sample.

Will an outline ring wear away over time?

No coating sits in the groove. Because the line is machined into the stainless, cleaning and daily use cannot rub the outline off.

Can the ring size be adjusted for a different frame?

The ring geometry follows the frame family. Send the cistern model and we will confirm the ring spacing before sampling.

Is the charcoal tone stable across repeat orders?

We keep the approved sample as the master, so later rooms and replenishment batches are matched to the same plate.

Send the frame and the finish, receive a matched sample.

Share the cistern model, the plate footprint and the number of washrooms in the phase, and we will price the outline plate against your schedule.

REQUEST AN OUTLINE SAMPLE

Hot Tags: charcoal stainless flush plate with outline round buttons for modern washrooms, China charcoal stainless flush plate with outline round buttons for modern washrooms manufacturers, suppliers, factory

Send Inquiry